IPA15-HC Servo Drive/Controller Parker
Price:Contact us
The IPA04-HC is a single-axis servo drive/controller from Parker, built on the ACR control platform with Ethernet communication capabilities and a continuous power output of up to 1500W. It is programmed using the ACR-View software.
IPA04-HC 6.3A / 1*100-240VAC (2.5kVA)
The IPA is a single-axis drive/controller based on the IPA drive platform. Setup and programming is accomplished using the AcroBASIC language within the ACR-View programming environment
The IPA Controller is designed for industrial applications. To effectively install and troubleshoot the drive, you must have a fundamental understanding of the following:
• Motion control applications
• Electromechanical actuators
• Voltage, current, switches, and other electrical concepts
• Basic Programming
Input Power Level
| Model Number | Description |
| Motor Input Power | |
| IPA04-HC, IPA-15HC | 120/240 VAC single-phase mains motor input power |
| Control Input Power | |
| IPA04-HC, IPA-15HC | 120/240 VAC single-phase mains motor input power |
Output Power Level
Servo Motor Drives
In the following table, the maximum current is given at 120/240 VAC input, which equates to a motor bus voltage of 170/340 VDC.
Output Power Level
| Model | Continuous Shaft
Output Power (Watts) |
Continuous Current
(RMS) |
Peak Current
(RMS) |
| IPA04-HC | 400 | 3 | 9 |
| IPA15-HC | 1500 | 6.3 | 18.9 |
Drive Dimensions
Overall Width: 3.00 [76.1] for -04
3.41 [86.7] for-15
Length: 7.00 [177.8]
Height: 5.46 [138.7]
Weight
IPA04-HC: 3.2 (1.5)
IPA15-HC: 3.7 (1.7)
Contact with Mr Lam 0908 353 714 to purchase
Related Products
